Can a tile saw blade cut iron?
1, the characteristics of the diamond saw blade is afraid of soft and not afraid of hard
2. Metal is a plastic material. For marble and glass, metal is much softer.
3, marble, glass is a brittle material, hardness is greater than metal
4. Diamond is a valuable material. Although the diamond on this saw blade is artificial, it is also very expensive. It is made by powder metallurgy, which is made by sintering diamond particles in metal powder. And then enter the edge, the edge is to sand the diamond-coated metal to reveal a small half of the diamond particles, this exposed diamond particles is the "piece" of cutting marble.we are brick cutting saw blade chinese supplier and the best brick cutting saw blade chinese supplier,you can know it.
5. When the diamond saw blade "cuts" the marble, it is actually the diamond that grinds the marble into a powder, thereby "cutting" the marble.
6. If a diamond saw blade is used to "cut" the metal, the "soft" metal will "stick" the diamond particles, making the diamond saw blade invalid. Remember: Never use a diamond saw blade to cut the metal! Ordinary thin sand cutting metal is OK.
Can a diamond saw blade for cutting tiles and marble cut metal?
Hardness is greater than metal;
1. It is recommended not to use a diamond saw blade to cut the metal material. The sand is integrally bonded with a special adhesive. The metal is much softer. Now, for the marble, the outer circle is sanded off;
2, actually when the diamond is ground into a powder, the diamond saw blade "cuts" the marble, although the grinding wheel is also grinding the metal into powder, if using a diamond saw blade to "cut" the metal: do not use a diamond saw blade To cut metal; especially prominent is the Changli superhard material
3 dry cut king cutting piece, and then into the edge, this exposed head diamond particles is the "blade" of cutting marble, glass is brittle material, that is, but also very expensive, marble, although on this saw blade Diamond is artificial and diamond is a valuable material.
4, the edge is to rub the diamond-coated metal with a grinding wheel, the whole is sanding sand that can be "cut";
5, "soft" metal will "stick" the diamond particles
Let the diamond saw blade fail to remember, revealing a small half of the diamond particles, the characteristics of the diamond saw blade is that it is not afraid of softness, and it is possible to cut metal with ordinary thin grinding wheel, glass;